About duct heater

Air duct heater structure:

1. The duct heater uses a stainless steel heating tube as a heating element

2. Use carbon steel or stainless steel as a bracket

3. Using a combined connection method

Air duct heater product features:

1. The medium thermoelectric heating tube adopts an outer-wound corrugated stainless steel belt, which increases the heat dissipation area and greatly improves the heat exchange efficiency.

2. The design of the medium heat heater is reasonable, the wind resistance is small, the heating is uniform, and there is no high and low temperature dead angle.

3. Air duct heater product application: Heating air for drying/vulcanization, heat treatment, reheating and dehumidification of various substances and other similar applications.

Air duct heater application areas:

The duct heater is primarily used to heat the required air flow from the initial temperature to the desired air temperature up to 850 °C. It has been widely used in many research and production laboratories such as aerospace, weapons industry, chemical industry and higher education institutions. It is especially suitable for automatic temperature control and high flow high temperature combined system and accessory test.

The range of air heaters used is wide:

It can heat any gas, and the generated hot air is dry, non-conductive, non-flammable, non-explosive, non-chemically corrosive, non-polluting, safe and reliable, and the heated space is heated up quickly (controllable).